Reduce oil and sediment flowing through trench drains and pipes
Early capture of stormwater pollutants is always the best-case scenario. But not always achievable. And even if there are stormwater management products in place at the drain level those products can fail, get damaged or neglected. In those cases, the Ultra-Trench Filter can remove hydrocarbons and other pollutants that have traveled further downstream.
Use the Ultra-Trench Filter in conjunction with storm drain products like the Ultra-Drain Guard, Ultra-Curb Guard or Ultra-Grate Guard for a “one-two punch” in stormwater management.
Product Highlights
Filter design forces water to flow around and through a series of X-Tex filter strips - sand, silt and sediment are trapped between the strips while hydrocarbons are absorbed by the X-Tex material.
Unit has a 10 ft. x 2 ft. section of filter strips - nylon cord is sewn along the entire length of the fabric for added strength.
Loops on each end allow Ultra-Trench Filters to be connected together for long runs of trench/pipe.
Ten-foot cord (included) can be used to tie off the Ultra-Trench Filter and secure it in place.
• Combine the strength of Blow Molded Plastic panels and Galvanized Metal Legs. The panels have a recessed face to help protect the reflective sheeting and the panels are reinforced to reduce bending...
Quantity 1-4: $56 each
Quantity 5-9: $52 each
Quantity 10+: $48 each
Optional Bucket Shelf captures spills from dispensing. Spills that exceed 3 gallons are channeled into the 360 gallon sump through a bulkhead fitting. 5 Year Limited Warranty.
